877.812.1137

free so2

Potassium Metabisulfite: Product Spotlight

What is Potassium Metabisulfite?

potassium metabisulfite

Potassium Metabisulfite is an antioxidant and sanitizer, and has several uses in winemaking. After crushing and de-stemming, it is used to help kill off any spoilage bacteria and natural yeast that may be present on the grapes or equipment. It also helps to preserve wine, specifically protecting it against oxidization.

Throughout the entire winemaking process, it’s important to measure your SO2 levels and adjust as needed to improve and lengthen the preservation of your wine. The exact amount needed to be effective is entirely determined by the pH of the wine. Also, free SO2 levels fall faster in a wooden barrel versus in glass or stainless steel tanks, so make sure you manage your SO2 levels very closely.

How do I use it?

If you are adding Potassium Metabisulfite to your must, the proper amount is ¼ teaspoon per 5 gallons of must. If you are making an SO2 sanitizing solution, add 8 teaspoons for every 1 gallon of water. Place into a spray bottle for quick and easy use. After cleaning your equipment and again before use, spray the solution generously and shake off/let any extra solution drip dry.

Potassium Metabisulfite has a shelf life of about one year if you are using it to add to your wine. If you have some that is over a year old, no worries! It still functions as a sanitizer, just make sure you separate and label each to avoid any mix ups.

Where can I get it?

You can find and purchase Potassium Metabisulfite here. Need assistance in using SO2, whether adding to your wine or sanitizing your equipment? Give us a call at (877) 812 – 1137 to speak with a sales associate who can help you!

Follow us on Instagram here and like us on Facebook here. For Virtual Winemaking Classes click here.

Free SO2: When and How

Protecting your wine with free SO2

Keeping the required amount of free SO2 in your wine is one of the important post-fermentation care steps you’ll need to stay on top of. While some people decide not to add SO2 (which is a personal preference, though we at Musto Wine Grape definitely recommend keeping the proper amount of free SO2 in your wine at all times), others choose to keep their wine protected by using it diligently.

Why we add it

To keep the wine protected. KMS serves as an antimicrobial and antioxidant and as such is a very important part in keeping your wine out of harm’s way. Without it, your wine can go bad very quickly.

How to test free SO2

Aeration oxidation method, manual ripper method, Vinmetrica, Hanna titrator, titrets

Setup for “aerative oxidation” method of checking free SO2. Though time intensive, it yields exact and accurate reuslts.

When to add it

  • During crush (to kill off any unwanted native yeast)
  • When fermentation has completed (be sure that MLF has completed as well, if that’s the goal)
  • During aging. Example: Each month many winemakers will test SO2, make any SO2 adds if needed, and then top it off.

Investing in Vinmetrica SO2 wine analyzer makes testing easy

How to add it

You’ll need to get potassium metabisulfite, if you don’t already have it. You may prefer to use campden tablets, which is fine too. Make sure it says potassium metabisulfite rather than sodium metabisulfite. The easiest way to figure out how much free SO2 you’ll need to add is to know your pH, first of all. Then you’ll need to decide if you’re using .8 or .5/6 molecular SO2. .8 is usually used for white wines, whereas .5 is used for red wines. Measure your free SO2 if you have a way of doing so. Then use the graph below to figure out what the target free SO2 is. From there you will likely choose an easy-to-use online resource such as wineadds.com to find out exactly how many grams of potassium metabisulfite should be added. Mix it with a small amount of water to ensure it can become completely incorporated into the wine.

*Remember: just knowing your target free SO2 in ppm does NOT tell you how many grams you will be adding. You need to figure that out as a second step, with an online SO2 calculator*

Graph indicating required free SO2

Now that you have a solid understanding of why, how, and when you add meta, you may want to delve into some deeper questions, such as…

Why do I need to keep adding meta? If I add a certain amount shouldn’t it stay at that number?

This is a great question. There are a lot of variables that go into answering this in as cohesive a way possible, and this could really be a topic in and of itself. Let’s keep it simple here: there are two measurements of SO2 in wine: free and bound. The free SO2 is what is actively protecting the wine, whereas bound SO2 is what has already tacked on to other compounds within the wine and as such is no longer able to actively protect it in the same way. Both are important numbers, but if a winemaker is only checking one, it’s going to be free. Over time free SO2 can become bound to various acids, solids, sugars, bacteria, yeasts, etc., that are present in the wine, which is why this number will not necessarily stay constant, especially immediately.

Why does pH affect how much SO2 I need to add?

A rule of thumb to remember is that higher pH = higher free SO2 requirement. Lower pH = lower free SO2 requirement. The chart below demonstrates the amount of free SO2 required base don the pH of the wine. This is just one of the many reasons that checking and knowing your wine’s pH is critical.

Do I need to measure total SO2 as well?

Knowing this number is important, but not as crucial as knowing your free SO2. It’s also a little less accessible of a test to run, which is why most home winemakers don’t choose to pursue knowing the total SO2 of their wines. It is possible to overadd SO2 and have the total SO2 be higher than desirable which can be problematic, so be sure to keep a running log and closely track how much you have added from the beginning of the wine’s life onward.

Musto’s Wine Analysis Services

If you’ve ever found yourself wondering…

  • How do I get accurate numbers on my wine samples?
  • Can I trust the readings I’m getting?
  • How do I even do this test?!

…fear not! Musto Wine Grape Company can happily assist you with all of your wine analysis needs.

Samples to be tested – a truly beautiful sight!

What analyses do we offer?

  • Brix, pH, TA
  • Free and/or total SO2
  • Alcohol
  • MLF
  • YAN
  • Sensory analysis

Why is analysis important?

  • Knowing the Brix, pH, and TA of your juice sample is the most important first step pre-fermentation. Depending on these numbers you may need to acidulate (add acid) or ameliorate (add water) to your must or juice before initiating fermentation.
  • SO2 levels will indicate how well protected your wine is. You may need to add more or less depending upon the reading.
  • Alcohol % (ABV) is an important number to confirm, especially if looking to confirm the final number for a wine label.
  • The presence of malolactic bacteria will indicate whether or not MLF has completed in your wine.
  • YAN numbers will tell you the amount of yeast assimilable nitrogen levels will help you decide how much nitrogen/nutrients you may want to add throughout the alcoholic fermentation.
  • Sensory analysis entails our highly knowledgeable and skilled staff conducting a taste test on your samples. This is especially helpful if you are looking to see how to improve upon your current wine, or how to sharpen your winemaking skills for future vintages.

pH and TA are important numbers to know as they will affect the entire winemaking process from start to finish

 

Interested in getting your wines analyzed at our lab?

Great! There’s one of two ways to get your samples to us:

  1. Drop by to say hello and give them to us directly. You can fill out a lab analysis form from our website to bring in with you.
  2. Send them in with the above lab analysis form. Be sure to include all of your contact information!

Acid titration

Any other questions? Give us a call at 860-278-7703. We’re always happy to help you make your wine the best it can be!